AMS Go
Free template · Risk assessment

Electrical work risk assessment template (PDF & Excel) – pre-filled

Pre-filled risk assessment for work on electrical installations with 19 typical hazards – from the five safety rules, back-feeding and arc flash to qualification and responsibility, ladders, lone working and breakdown service – with measures, legal bases and inspection intervals.

As of PDF and ExcelAMS Go editorial team

Free: sign up for the newsletter once and all templates are unlocked in this browser. You can unsubscribe at any time.

Work on electrical installations involves the risk of electric shock and arc flash – often with fatal or serious consequences. The basic rule is to work in the dead state following the five safety rules of DIN VDE 0105-100. The risk assessment under Sections 5 and 6 ArbSchG is supplemented by DGUV Regulation 3, under which only qualified electricians or electrically instructed persons under their direction and supervision may work on installations.

The template comes pre-filled with 19 typical hazards and common measures – each with its legal basis. You add the rating, owners and deadlines for your company; a second overview lists the periodic inspections and instructions, with automatic due dates in Excel.

What the template contains

  • Landscape PDF with 19 pre-filled hazards from the five safety rules and arc flash to lone working and breakdown service
  • Same structure as the general risk assessment: hazard factor, risk rating, STOP measures, deadlines, effectiveness
  • Excel spreadsheet with drop-down lists and automatic risk calculation
  • Overview of 9 periodic inspections and instructions – in the PDF and as an Excel sheet that calculates the next due date

How to use the template

  1. 1

    Record work and installations

    Note which installations are worked on – low-voltage distribution boards, machine controls, PV systems, charging infrastructure – and which types of work occur: dead working, work near live parts, measuring and fault finding. Delete rows that do not apply.

  2. 2

    Check and rate on site

    Check whether isolation points, locking devices, voltage detectors, insulated tools and arc flash PPE are available, and clarify responsibilities between the person responsible for the installation and the person responsible for the work activity. Rate each hazard by likelihood and severity.

  3. 3

    Follow up measures and inspections

    Enter owners and deadlines, check effectiveness and keep inspections under DGUV Regulation 3, protective equipment and aids, ladders and instructions up to date in the second sheet.

Risk assessments in AMS GoTemplates for each activity, AI suggestions for typical electrical work hazards, photos of the current situation and measures with deadlines in the action plan – with a history of every change.

Legal basis

  • Sections 5 and 6 ArbSchG: risk assessment and documentation
  • DGUV Regulation 3: qualified electrician and direction and supervision (Section 3), inspections (Section 5)
  • DIN VDE 0105-100: operation of electrical installations, five safety rules, person responsible for the installation and for the work activity
  • DGUV Rule 103-011 and DGUV Information 203-077: live working, arc flash PPE
  • Sections 3, 4, 12 and 14 BetrSichV and TRBS 2121 Part 2: work equipment, instruction, inspection, ladders

Frequently asked questions

What are the five safety rules?

Under DIN VDE 0105-100, in this order: 1. disconnect completely, 2. secure against reconnection, 3. verify absence of voltage on all poles, 4. earth and short-circuit, 5. cover or barrier adjacent live parts. After the work is complete, the measures are removed in reverse order.

Who may carry out work on electrical installations?

Qualified electricians, as well as electrically instructed persons and laypersons under the direction and supervision of a qualified electrician (Section 3 DGUV Regulation 3). You define which work an electrically instructed person may carry out independently in the instruction and appointment.

When is arc flash PPE required?

When an arc flash cannot be ruled out despite technical and organisational measures – for example during switching operations, when verifying the absence of voltage or when working near live parts. DGUV Information 203-077 describes how to select the appropriate protection class for clothing, face protection and gloves.

You may use and adapt the template freely in your own company and for your own clients. It reflects the regulations named as they stand.

Never search a spreadsheet for a deadline again

In AMS Go, what this template covers lives in one system with reminders, history and records at the push of a button – mobile and with AI support.

Contact

Get in touch

Book an appointment with us – or send us a message.

Kim Marius GräfeFrank MezlerLukas KleinBenjamin Kostrzewa

Personal and direct – with our founding team. Meet the founding team