AMS Go
Free template · Work permits

Permit to work at height and on roofs – template (PDF)

Our own permit (Erlaubnisschein) for work with a risk of falling – for example on roofs, on plant and at fall edges: hazards at the place of work, protective measures in the order of priority of ASR A2.1, fragile surfaces, personal fall protection equipment with anchor points, weather, rescue plan, release and completion.

As of PDFAMS Go editorial team

Free: sign up for the newsletter once and all templates are unlocked in this browser. You can unsubscribe at any time.

Falls from roofs, through rooflights and from elevated workplaces are among the accidents with the most serious consequences. Under the German workplace rule ASR A2.1, a risk of falling exists at a fall height of more than 1.0 m; workplaces and traffic routes more than 2.0 m from the fall edge lie outside the danger zone. Breaking through a surface that is not load-bearing also counts as a fall.

A permit for work at height is not expressly required. It is an organisational measure that ensures someone assesses and releases the place of work before non-routine jobs – such as maintenance on the roof, cleaning strip lights or installation work on plant. This template takes you through the protective measures in the order of priority of ASR A2.1, asks about anchor points, weather and the rescue plan, and ends with release and acceptance. The structure is AMS Go's own template, which you can adapt to your company.

What the template contains

  • PDF permit with job, place of work, persons carrying out the work, supervision and validity
  • Seven questions on fall hazards at the place of work, including fragile components and falling objects
  • Protective measures in the order of priority of ASR A2.1: fall prevention, collective fall arrest, personal fall protection equipment
  • Sections on anchor points and equipment, weather with stop criteria, and rescue plan and first aid
  • Release with three signatures and completion of the work with acceptance by the client

How to use the template

  1. 1

    Look at the place of work together

    Before starting, go to the place of work with the supervisor. Record the fall height, fall edges and fragile components – including on the way to the place of work – and check who is below.

  2. 2

    Set measures in order of priority and release

    First check guard rails, side protection and covers, then collective fall arrest and only then personal fall protection equipment. Specify anchor points, stop criteria for the weather and the rescue method. Only when everything has been implemented do you sign the release.

  3. 3

    Complete and accept the work

    After the work is finished, check that material has been removed, covers and guard rails are back in their protective position and access points are locked. Record incidents and defects on the roof or anchor points and keep the permit.

Risk assessments in AMS GoAssess work at height and on roofs as a separate activity, attach photos of the place of work and track actions with owner and deadline in the action plan.

Legal basis

  • Annex No. 2.1 of the Workplaces Ordinance (ArbStättV): protection against falls and falling objects, entering danger zones
  • ASR A2.1 Nos. 4.1 and 4.2: risk of falling from a fall height of more than 1.0 m, order of priority of protective measures
  • ASR A2.1 Nos. 5.4 and 7: danger zone up to 2.0 m from the fall edge, workplaces and traffic routes on roofs, roofs and components that are not safe to walk on
  • ASR A2.1 No. 8 and DGUV Regulation 38 “Construction work”: different and additional requirements for construction sites
  • Annex 1 No. 3 BetrSichV and TRBS 2121: use of work equipment for temporary work at height, risk of falling
  • DGUV Rule 112-198 and 112-199: use of personal fall protection equipment, rescue from heights and depths
  • Section 8 DGUV Regulation 1: supervision and personal protection measures for dangerous work

Frequently asked questions

Is a permit for work at height mandatory in Germany?

There is no express duty to use a permit for work at height. What is required is to assess the risk of falling and to take protective measures in the order of priority of ASR A2.1. The permit is an organisational measure that you can specify in the risk assessment – useful above all for non-routine work, on roofs with fragile components and when contractors are used.

From what height are protective measures against falls required?

Under ASR A2.1, a risk of falling exists at a fall height of more than 1.0 m. Between 0.2 m and 1.0 m, and where there is a risk of slipping off, falling in or sinking in, you determine in the risk assessment whether measures are needed. For construction sites, ASR A2.1 contains different and additional requirements in No. 8.

When may work be carried out with personal fall protection equipment?

Only if neither fall prevention such as guard rails or covers nor collective fall arrest such as safety nets or protective scaffolds can be set up. Suitable anchor devices are a prerequisite; employees must be briefed on using the equipment and instructed on the rescue measures (ASR A2.1 No. 4.2). That is why the permit asks specifically about anchor points, instruction and the rescue plan.

You may use and adapt the template freely in your own company and for your own clients. It reflects the regulations named as they stand.

Never search a spreadsheet for a deadline again

In AMS Go, what this template covers lives in one system with reminders, history and records at the push of a button – mobile and with AI support.

Contact

Get in touch

Book an appointment with us – or send us a message.

Kim Marius GräfeFrank MezlerLukas KleinBenjamin Kostrzewa

Personal and direct – with our founding team. Meet the founding team