AMS Go
Free template · Risk assessment

Metalworking risk assessment template (PDF & Excel) – pre-filled

Pre-filled risk assessment for turning, milling and grinding with 19 typical hazards – from rotating parts, swarf and grinding wheels to metalworking fluids and noise, fire, set-up and loads – with measures, legal bases and inspection intervals.

As of PDF and ExcelAMS Go editorial team

Free: sign up for the newsletter once and all templates are unlocked in this browser. You can unsubscribe at any time.

At lathes, milling machines and grinders, mechanical hazards meet hazardous substances: rotating spindles and workpieces, sharp swarf, bursting grinding wheels, plus metalworking fluids on the skin and in the air, noise and fire hazards. The obligation to carry out a risk assessment (Gefährdungsbeurteilung) follows from Sections 5 and 6 of the Occupational Safety and Health Act (ArbSchG) and Section 3 of the Ordinance on Industrial Safety and Health (BetrSichV); for metalworking fluids, the Hazardous Substances Ordinance (GefStoffV), TRGS 611 and DGUV Rule 109-003 apply.

The template comes pre-filled with 19 typical hazards and common measures – each with its legal basis. You add the rating, owners and deadlines for your company; a second overview lists the periodic inspections, health care and instructions, with automatic due dates in Excel.

What the template contains

  • Landscape PDF with 19 pre-filled hazards from rotating parts, swarf and grinding wheels to metalworking fluids, noise and fire
  • Same structure as the general risk assessment: hazard factor, risk rating, STOP measures, deadlines, effectiveness
  • Excel spreadsheet with drop-down lists and automatic risk calculation
  • Overview of 9 periodic inspections, health care and instructions – in the PDF and as an Excel sheet that calculates the next due date

How to use the template

  1. 1

    Record machines and processes

    List the machines – conventional lathes and milling machines, CNC machines, bench grinders, hand-held grinders – and note which materials and metalworking fluids you use. With enclosed CNC machines some rows no longer apply, while set-up and fault clearance become more important. Delete rows that do not apply.

  2. 2

    Check and rate on site

    Look at safeguards, extraction, fluid maintenance and the condition of the floors and talk to the operators, including about everyday shortcuts such as manual emery work or blowing off. Have noise and exposure determined by a competent person and rate each hazard by likelihood and severity.

  3. 3

    Follow up measures and inspections

    Enter owners and deadlines, check effectiveness and keep machine inspections, the weekly metalworking fluid check, extraction, cranes, health care and instructions up to date in the second sheet.

Risk assessments in AMS GoTemplates for each activity, AI suggestions for typical metalworking hazards, photos of the current situation and measures with deadlines in the action plan – with a history of every change.

Legal basis

  • Sections 5 and 6 ArbSchG: risk assessment and documentation
  • Sections 3, 4, 10, 12 and 14 BetrSichV: risk assessment for work equipment, safeguards, maintenance, instruction, inspections
  • Sections 6, 7 and 14 GefStoffV with TRGS 611, TRGS 401 and DGUV Rule 109-003: metalworking fluids, skin protection, extraction, instruction
  • LärmVibrationsArbSchV and ArbMedVV Annex Parts 1 and 3: noise, health care for noise and wet work
  • DGUV Information 209-066 (machining tools) and 209-002 (grinding), DGUV Regulation 3, DGUV Regulation 52: machine tools, grinding wheels, electrical installations, cranes

Frequently asked questions

What does TRGS 611 require for metalworking fluids?

TRGS 611 sets restrictions on the use of water-miscible and water-mixed metalworking fluids in which carcinogenic N-nitrosamines can form. On the one hand it concerns the composition – such as doing without nitrosating agents and certain secondary amines – and on the other hand monitoring in the company: you check the pH value and nitrite content of the water-mixed fluid weekly. If the nitrite content is above 20 mg/l, measures such as replacement or partial replacement are necessary.

May gloves be worn at lathes, milling machines and drills?

Not near rotating spindles, tools and workpieces: gloves can be caught and pull the hand into the machine. DGUV Information 209-066 explicitly warns against this. Gloves belong to tasks with the machine stopped – such as changing workpieces or removing swarf – and you set out the ban at running machines in the operating instructions.

From what level is hearing protection mandatory in machining?

From a daily noise exposure level of 80 dB(A), you provide hearing protection and offer health care. From 85 dB(A), hearing protection must be worn, the noise area must be marked, and health checks become mandatory (LärmVibrationsArbSchV, ArbMedVV Annex Part 3). Technical measures such as enclosure and low-noise air nozzles take priority.

You may use and adapt the template freely in your own company and for your own clients. It reflects the regulations named as they stand.

Never search a spreadsheet for a deadline again

In AMS Go, what this template covers lives in one system with reminders, history and records at the push of a button – mobile and with AI support.

Contact

Get in touch

Book an appointment with us – or send us a message.

Kim Marius GräfeFrank MezlerLukas KleinBenjamin Kostrzewa

Personal and direct – with our founding team. Meet the founding team