AMS Go
Health

Whole-body vibration from vehicles and construction machinery in Germany: limit values and measures

Anyone who drives a forklift, wheel loader, excavator or tractor every day is exposed to vibration that acts on the spine through the seat. Which values the German Noise and Vibration Occupational Safety Ordinance sets, how you determine exposure, which measures work and when occupational health checks are due.

Last updated on 8 min readAMS Go editorial team

Key points at a glance

  • For whole-body vibration, the action value is A(8) = 0.5 m/s² and the exposure limit value is A(8) = 1.15 m/s² in the X and Y directions and 0.8 m/s² in the Z direction (Section 9 (2) of the Noise and Vibration Occupational Safety Ordinance, LärmVibrationsArbSchV).
  • The employer must determine and assess exposure – on the basis of manufacturer's data and other accessible sources or, if compliance with the values cannot be established reliably in this way, by measurement (Section 3 (1) LärmVibrationsArbSchV).
  • If the action value is exceeded, a programme of technical and organisational measures must be drawn up and implemented; the exposure limit values must not be exceeded (Section 10 (3) and (4)).
  • Technical measures take priority: low-vibration vehicles, suspension seats that are correctly adjusted, level routes and adapted speed.
  • Above the action value, occupational health checks must be offered; if the exposure limit values are reached or exceeded, they are mandatory (Annex Part 3 of the Ordinance on Occupational Medical Care, ArbMedVV).

What whole-body vibration is and who is affected

Whole-body vibration is mechanical vibration that is transmitted to the whole body and can cause risks to health and safety, in particular back pain and damage to the spine (Section 2 (5) LärmVibrationsArbSchV). It arises above all when driving: unevenness of the ground and movements of the machine are transmitted to the driver through the seat and the floor. Hand-arm vibration, which acts through hand-held machines such as angle grinders or rotary hammers, is a separate topic with its own values.

  • forklifts and other industrial trucks, especially on uneven floors, thresholds and outdoors,
  • earth-moving machinery such as wheel loaders, excavators, bulldozers, dumpers and rollers,
  • tractors and other agricultural and forestry machinery,
  • lorries and vans on construction sites, in quarries and on poor tracks,
  • municipal vehicles, sweepers and tow tractors,
  • workplaces on vibrating platforms or at stationary machines that transmit vibration into the floor.

The consequences do not appear immediately but after years. Disc-related diseases of the lumbar spine caused by many years of predominantly vertical exposure to whole-body vibration while seated can be recognised as an occupational disease (BK no. 2110 of the German Occupational Diseases Ordinance). There are also short-term effects: vibration can interfere with reading displays and operating controls and thus increase the risk of accidents; this too belongs in the risk assessment (Annex no. 2.3 LärmVibrationsArbSchV).

Action value and exposure limit values

The yardstick is the daily vibration exposure value A(8): the vibration exposure averaged over time, related to an eight-hour shift (Section 2 (6) LärmVibrationsArbSchV). What is measured is the frequency-weighted acceleration in three directions: X in the direction of travel, Y across it, Z vertical. The Ordinance has two thresholds:

  • Action value (Auslösewert)

    LevelA(8) = 0.5 m/s²

    What followsInstruction and general occupational health advice; if exceeded, programme of measures to reduce vibration and offer of occupational health checks

  • Exposure limit value in the X and Y directions

    LevelA(8) = 1.15 m/s²

    What followsMust not be exceeded; if exceeded, determine the reasons without delay and take further measures; mandatory occupational health checks

  • Exposure limit value in the Z direction

    LevelA(8) = 0.8 m/s²

    What followsMust not be exceeded; if exceeded, determine the reasons without delay and take further measures; mandatory occupational health checks

Determining exposure: estimating, calculating, measuring

If employees are or may be exposed to vibration, you must determine and assess the exposure. The risk assessment may only be carried out by persons with the necessary expertise; if you lack the knowledge, you obtain expert advice, for example from the occupational safety specialist or the company doctor (Sections 3 and 5 LärmVibrationsArbSchV). How the assessment proceeds in detail is described in the Technical Rules for the Ordinance (TRLV Vibrationen) with the parts on assessing the risk from vibration, measuring vibration and vibration protection measures.

  1. 1

    Record activities and duration of exposure

    For each vehicle, note who drives it for how long and under what conditions: surface, speed, load. What counts is the time during which the vibration actually acts, not the time spent at the vehicle.

  2. 2

    Obtain vibration data

    You can get information from the manufacturer or distributor and from other readily accessible sources (Section 3 (1)). Manufacturer's data from the operating instructions apply to defined test conditions and may differ from real use; empirical values for typical applications are published by the accident insurance institutions, among others.

  3. 3

    Calculate A(8)

    The daily value results from the acceleration and the daily duration of exposure. If someone drives several vehicles, the partial exposures are combined.

  4. 4

    Measure if it is not clear

    If compliance with the action and exposure limit values cannot be established reliably, the extent of exposure must be determined by measurement. Only persons with the necessary expertise and equipment may measure; you keep the measurement results for at least 30 years (Section 3 (1), Sections 4 and 5).

  5. 5

    Document and keep up to date

    The risk assessment is documented regardless of the number of employees – with the hazards and the measures. It must be updated if working conditions change significantly or if the occupational health checks suggest it (Section 3 (4)).

For a single activity: A(8) is the acceleration multiplied by the square root of the duration of exposure divided by eight hours. From this you can read off after what driving time the thresholds are reached arithmetically. The table shows this for the Z direction; the acceleration values are calculation examples, not data for particular vehicles.

  • Acceleration in the Z direction 0.4 m/s²

    Action value 0.5 m/s² reached afternot reached in 8 hours

    Exposure limit value 0.8 m/s² reached afternot reached in 8 hours

  • Acceleration in the Z direction 0.6 m/s²

    Action value 0.5 m/s² reached afterabout 5 hours 30 minutes

    Exposure limit value 0.8 m/s² reached afternot reached in 8 hours

  • Acceleration in the Z direction 0.8 m/s²

    Action value 0.5 m/s² reached afterabout 3 hours

    Exposure limit value 0.8 m/s² reached after8 hours

  • Acceleration in the Z direction 1.0 m/s²

    Action value 0.5 m/s² reached after2 hours

    Exposure limit value 0.8 m/s² reached afterabout 5 hours

  • Acceleration in the Z direction 1.2 m/s²

    Action value 0.5 m/s² reached afterabout 1 hour 20 minutes

    Exposure limit value 0.8 m/s² reached afterabout 3 hours 30 minutes

Risk assessments in AMS GoAssess vibration as a hazard for each vehicle and work area, track measures such as seat replacement or repair of routes with a deadline in the action plan and check the condition of routes during inspections.

Measures: start at the source

Vibration must be prevented at source or reduced as far as possible; technical measures take priority over organisational ones (Section 10 (1) LärmVibrationsArbSchV). The Ordinance lists a number of measures in Section 10 (2). Applied to vehicles and construction machinery, this means:

  • Choose working methods that reduce exposure, for example shorter routes, conveyor technology instead of vehicle traffic or remote-controlled machines.
  • Procure and use vehicles that are designed for the task and cause as little vibration as possible; compare the manufacturer's vibration emission data before buying.
  • Provide seats that effectively dampen whole-body vibration and adjust them to the driver's weight. An incorrectly adjusted or defective suspension seat can increase exposure instead of reducing it.
  • Maintain routes: repair potholes, level thresholds and crossings, repair hall floors. The Ordinance expressly mentions maintenance programmes for roadways as well.
  • Maintain vehicles: check suspension, seat, tyres and tyre pressure regularly.
  • Train drivers: adapted speed, anticipatory driving, no driving over obstacles, correct seat adjustment.
  • Limit duration and intensity: rotate activities, split driving times and draw up work schedules with adequate periods free of exposure.
  • Provide clothing to protect against cold and damp when driving outdoors or in open cabs.

Instruction and occupational health checks

If the action value may be reached or exceeded, the employees concerned receive instruction based on the risk assessment: before starting the activity, at regular intervals thereafter and whenever the activity causing exposure changes significantly (Section 11 (1) LärmVibrationsArbSchV). It must be understandable and contain at least the nature of the hazard, the measures taken, the action and exposure limit values, the results of the determination, safe and low-vibration working methods, the entitlement to occupational health checks and guidance on recognising and reporting possible damage to health (Section 11 (2)).

  • Action value may be reached or exceeded

    DutyInstruction of the employees concerned

    BasisSection 11 (1) and (2) LärmVibrationsArbSchV

  • Action value A(8) = 0.5 m/s² exceeded

    DutyGeneral occupational health advice, which can be given as part of the instruction; offered occupational health checks (Angebotsvorsorge)

    BasisSection 11 (3) LärmVibrationsArbSchV, Annex Part 3 (2) no. 2 ArbMedVV

  • Exposure limit value of 1.15 m/s² in the X or Y direction or 0.8 m/s² in the Z direction reached or exceeded

    DutyMandatory occupational health checks (Pflichtvorsorge)

    BasisAnnex Part 3 (1) no. 4 ArbMedVV

Mandatory health checks must be arranged before the activity starts and regularly thereafter; without them the activity may not be carried out. Offered health checks must be offered by you; participation is voluntary for employees. Intervals, the health check register and the procedure are explained in the guide “Occupational health checks”.

Special cases: combinations and particularly vulnerable groups

Vibration rarely acts alone. The risk assessment must take possible interactions and combined effects into account (Section 3 (3) LärmVibrationsArbSchV). For the back, the coincidence with unfavourable postures is particularly significant: twisted sitting when reversing, long periods of sitting without a break and lifting loads immediately after getting down.

  • Particularly vulnerable groups: the effects on employees who belong to particularly vulnerable groups must be considered separately in the risk assessment (Section 3 (2) no. 2 (f)).
  • Pregnant women: shocks and vibration are among the physical agents for which the employer must rule out an unjustifiable risk (Section 11 (3) of the Maternity Protection Act, MuSchG).
  • Young people may not be employed in work in which they are exposed to harmful effects of shocks; exceptions apply under narrow conditions for training (Section 22 of the Young Persons Protection of Employment Act, JArbSchG).
  • Long shifts: if exposure lasts longer than eight hours, this must be taken into account in the assessment (Section 3 (2) no. 2 (e)); A(8) remains related to eight hours, and longer driving times increase the value.
  • Cold: the Ordinance expressly names activities at low temperatures as a special working condition (Section 3 (2) no. 2 (a)).

Checklist: whole-body vibration under control

  • All vehicles and machines with a driver's workplace recorded, including hired equipment
  • Daily duration of exposure determined per person and vehicle
  • Vibration data obtained from operating instructions, manufacturer's information or recognised sources; measured where the situation is unclear
  • A(8) calculated per person and compared with the action value and exposure limit values
  • Risk assessment documented, measurement results filed for at least 30 years
  • Seats suspended, functional and adjustable to the driver's weight
  • Routes, hall floors and crossings in good condition, defects in the action plan
  • Programme of measures drawn up if the action value is exceeded
  • Employees instructed and given occupational health advice
  • Offered or mandatory health checks arranged and documented in the health check register

Frequently asked questions

Which limit values apply to whole-body vibration?

The action value is A(8) = 0.5 m/s². The exposure limit value is A(8) = 1.15 m/s² in the X and Y directions and 0.8 m/s² in the Z direction (Section 9 (2) LärmVibrationsArbSchV). A(8) is the daily value related to an eight-hour shift. Different values apply to hand-arm vibration: 2.5 m/s² as the action value and 5 m/s² as the exposure limit value.

Do I have to have whole-body vibration measured?

Not always. You may determine exposure on the basis of manufacturer's data and other readily accessible sources. Measurements are required if it cannot be established reliably in this way whether the action and exposure limit values are complied with (Section 3 (1) LärmVibrationsArbSchV). Only persons with the necessary expertise and suitable equipment may measure; the results must be kept for at least 30 years.

What is the difference between whole-body and hand-arm vibration?

Whole-body vibration is transmitted to the whole body through the seat or standing surface, typically when driving vehicles and construction machinery, and mainly affects the spine. Hand-arm vibration is caused by hand-held or hand-guided machines and can cause circulatory disorders and damage to nerves, bones and joints in the hands and arms. The two are determined and assessed separately.

What do I have to do if the action value is exceeded?

You must draw up and implement a programme of technical and organisational measures to reduce exposure (Section 10 (4) LärmVibrationsArbSchV), instruct the employees and arrange occupational health advice for them (Section 11) and offer occupational health checks (Annex Part 3 (2) no. 2 ArbMedVV).

Is an air-suspended seat sufficient as a protective measure?

A suspension seat is one of the measures the Ordinance expressly names (Section 10 (2) no. 3 LärmVibrationsArbSchV). However, it only works if it suits the vehicle, is intact and is adjusted to the weight of the person driving. It helps little against shocks from potholes and against vibration in the direction of travel and across it. Whether the seat is sufficient only becomes clear once the remaining exposure has been determined.

This guide gives a general overview of German occupational safety law and does not replace legal advice. The regulations in force and the rules of the statutory accident insurance institutions are authoritative.

Organise occupational safety digitally

With the occupational safety software AMS Go you handle risk assessments, safety instructions, inspections and more in one system – mobile and with AI support.

Newsletter

Occupational safety, straight to your inbox

New templates, guides and changes to regulations – free from AMS Go. The newsletter is in German. You can unsubscribe at any time via the link in every email.

Privacy information

Contact

Get in touch

Book an appointment with us – or send us a message.

Kim Marius GräfeFrank MezlerLukas KleinBenjamin Kostrzewa

Personal and direct – with our founding team. Meet the founding team