Health and safety in Germany 2027: the changes companies need to prepare for
Between December 2026 and the end of 2028, several deadlines in German occupational safety expire and new rules take effect. Which changes have been adopted, which are only planned – and what you should prepare now.
Last updated on 9 min readAMS Go editorial team
Key points at a glance
- From 20 December 2026, demolition work involving asbestos with low or medium risk requires a permit; expertise for asbestos work must be proven by 5 December 2027 (Section 25(5) and (9) of the Hazardous Substances Ordinance, GefStoffV).
- From 20 January 2027, the EU Machinery Regulation (EU) 2023/1230 applies and replaces the Machinery Directive – relevant for every machine purchase and every substantial modification.
- The BG BAU (the accident insurance institution for the construction industry) brings the revised DGUV Regulation 2 into force on 1 January 2027; the BGW gives its member companies until 31 May 2027 to review their service contracts.
- Stricter limit values have been adopted: for lead and diisocyanates from 1 January 2029 (Directive (EU) 2024/869), and for cobalt, PAHs, 1,4-dioxane and isoprene through Directive (EU) 2026/2450, which must be transposed by 20 November 2028.
- The new CLP label format rules have been postponed to 2028 at the earliest, and mandatory electronic working time recording is only planned – but you already have to record working time today.
Key dates at a glance
Not every change affects every company. The table shows what has been adopted, when it applies, who is affected and what you should do. Status: 21 November 2026.
Permit for asbestos demolition work with low or medium risk
Applies from20 December 2026
Who is affectedConstruction, trades, maintenance in existing buildings
What to doObtain the permit or award such work to specialist contractors
Machinery Regulation (EU) 2023/1230
Applies from20 January 2027
Who is affectedAnyone who buys, builds or substantially modifies machinery
What to doAlign orders and modification projects with the Regulation
Revised DGUV Regulation 2 at the BG BAU
Applies from1 January 2027
Who is affectedMember companies of the BG BAU
What to doReview the form of support and the contract with the company doctor and safety specialist
Expertise for asbestos work
Applies from5 December 2027
Who is affectedAll companies carrying out asbestos work
What to doSchedule courses for responsible persons and employees
New CLP hazard classes for mixtures already on the market
Applies from1 May 2028
Who is affectedAll companies using hazardous substances
What to doIncorporate new safety data sheets, update the inventory and operating instructions
New limit values for cobalt, PAHs, 1,4-dioxane, isoprene; welding fumes added to the Directive
Applies fromTransposition by 20 November 2028
Who is affectedMetalworking, foundries, chemicals
What to doAssess exposures, plan protective measures ahead
Stricter limit values for lead and diisocyanates
Applies from1 January 2029
Who is affectedBattery, metal, plastics and coatings processing
What to doAlign measurements and protective measures with the new values
Asbestos: permit from December 2026, expertise by December 2027
Since the amendment of the Hazardous Substances Ordinance (Gefahrstoffverordnung, GefStoffV) in December 2024, new obligations apply to work on building components containing asbestos – with transition periods that now expire one after another (Section 25 GefStoffV):
Deadline 20 December 2026
What appliesA permit (Genehmigung) must be shown for demolition work with low or medium risk; it is deemed granted four weeks after the authority receives the company notification if it raises no objections
Legal basisSection 11a(4a), Section 25(9) GefStoffV
Deadline 5 December 2027
What appliesThe expert knowledge (Sachkunde) of the responsible person and the expertise (Fachkunde) of all employees deployed must be proven
Legal basisSection 25(5) and (6) GefStoffV
Deadline 5 December 2028
What appliesApprovals under the old rules for high-risk work expire
Legal basisSection 25(8) GefStoffV
This does not only affect demolition and remediation firms. Drilling into an older building with asbestos-containing plaster, filler or tile adhesive already counts as asbestos work. Check whether your employees work in existing buildings and schedule the courses so they are completed before December 2027.
Machinery Regulation from 20 January 2027
The Machinery Regulation (EU) 2023/1230 applies directly from 20 January 2027 and replaces the Machinery Directive 2006/42/EC; the German 9th Product Safety Ordinance (9. ProdSV) expires at the end of 19 January 2027. For operators, this means:
- Every machine placed on the market for the first time from 20 January 2027 must comply with the Regulation – the EU declaration of conformity then refers to Regulation (EU) 2023/1230.
- Existing machinery is protected; the Regulation does not require retrofitting (Art. 52).
- Anyone who substantially modifies a machine is considered the manufacturer and takes on the manufacturer's obligations up to CE marking (Art. 18).
- Instructions for use may be supplied digitally; the manufacturer must provide a paper version free of charge if requested at the time of purchase (Art. 10(7)).
DGUV Regulation 2: more institutions switch over
Each accident insurance institution brings the revised DGUV Regulation 2 (DGUV Vorschrift 2) into force itself. After the BGHM, VBG, BGN, BGW and other institutions, the BG BAU follows on 1 January 2027. The core of the revision: companies with up to 20 employees (previously 10) receive standard support without fixed service hours; above that, basic support of 2.5, 1.5 or 0.5 hours per employee per year applies.
Transition periods for existing contracts vary by institution – the BGW, for example, sets 31 May 2027 as the deadline for reviewing service contracts. At the BG BAU, the assignment to support groups and the requirements for the entrepreneur model may also change. Ask your institution when the revision applies to you, then review the scope of support and your contract.
Lead and diisocyanates: stricter limit values
Directive (EU) 2024/869 lowers the EU limit values for lead and introduces limit values for diisocyanates for the first time; member states had to transpose it by 9 April 2026. The strictest values apply after a transition period:
Lead – occupational exposure limit
Until 31 December 20280.03 mg/m³
From 1 January 20290.03 mg/m³
Lead – biological limit value
Until 31 December 202830 µg Pb/100 ml blood
From 1 January 202915 µg Pb/100 ml blood
Diisocyanates – 8-hour value
Until 31 December 202810 µg NCO/m³
From 1 January 20296 µg NCO/m³
Diisocyanates – short-term value
Until 31 December 202820 µg NCO/m³
From 1 January 202912 µg NCO/m³
In Germany, the revised Technical Rule TRGS 505 “Lead” (February 2026) applies. Since 16 May 2026, mandatory occupational health care (Pflichtvorsorge) must be arranged where an air concentration of 15 µg/m³ lead is exceeded; below that, health care must be offered – in particular to women of childbearing age (Annex Part 1 of the Ordinance on Occupational Health Care, ArbMedVV). If you work with diisocyanates – for example in PU foams, adhesives or coatings – check now whether exposures meet the value applicable from 2029.
New EU limit values for carcinogens and welding fumes
Directive (EU) 2026/2450 of 21 October 2026 amended the EU Carcinogens Directive 2004/37/EC once again. It entered into force on 19 November 2026 and must be transposed into German law by 20 November 2028. The key points:
- Cobalt and inorganic cobalt compounds: 0.01 mg/m³ inhalable and 0.0025 mg/m³ respirable, with transitional values until 20 November 2032
- Polycyclic aromatic hydrocarbons (PAHs), measured as benzo[a]pyrene: 0.00007 mg/m³ with a skin notation; certain sectors such as foundries and coking plants have a transitional value until 20 November 2033
- 1,4-dioxane: 7.3 mg/m³ as a long-term value and 73 mg/m³ as a short-term value, plus a biological limit value
- Isoprene: 8.5 mg/m³ as a long-term value
- Welding processes that release carcinogenic, mutagenic or reprotoxic substances of category 1A or 1B are now explicitly listed in Annex I of the Directive
Until transposition, the German occupational exposure limits and TRGS remain unchanged. If you weld, work with hard metal or handle substances containing PAHs, review your risk assessment against the future values now – extraction systems and substitution take time.
Hazard labelling: new hazard classes and CLP labels
Two developments are running in parallel under the CLP Regulation. As a user, you will mainly notice the first, because it brings new safety data sheets and labels:
- New hazard classes: Since 2025 there have been hazard classes for endocrine disruptors and for PBT, vPvB, PMT and vPvM substances (Delegated Regulation (EU) 2023/707). For substances already on the market, the transition period ended on 1 November 2026; for mixtures already on the market, it ends on 1 May 2028.
- New label rules: The CLP revision (EU) 2024/2865 prescribes minimum font sizes, among other things. Regulation (EU) 2025/2439 postponed these format rules and other parts from July 2026 and January 2027 respectively to 1 January 2028.
- Simplification (“omnibus”): In June 2026, Parliament and Council agreed on relief – no fixed font sizes for supplies to businesses, a minimum x-height of 1.2 mm (0.9 mm up to 125 ml) for consumer products, and 15 instead of 6 months to update labels after a change in classification. Formal adoption and publication in the Official Journal are still pending.
Working time recording: reform planned, obligation already applies
The obligation to record employees' working time already applies: the Federal Labour Court (Bundesarbeitsgericht) derived it from Section 3(2) No. 1 of the Occupational Safety and Health Act (ArbSchG) in September 2022 (decision of 13 September 2022, 1 ABR 22/21). The law does not yet prescribe a particular form.
The federal government intends to amend the Working Hours Act (Arbeitszeitgesetz) – including electronic recording and the option of a weekly rather than daily maximum working time. A draft from the Federal Ministry of Labour has been under discussion since summer 2026; as of November 2026, there is no cabinet decision. When the reform will come and with which transition periods is open.
What already applies in 2026: inspections and safety representatives
Two changes from the current year continue to have an effect in 2027 and belong in every plan:
- Minimum inspection rate: Since calendar year 2026, the labour inspectorates must inspect at least 5 percent of the establishments in their federal state every year (Section 21(1a) ArbSchG). The likelihood of an inspection is rising – risk assessments, instruction records and inspection reports should be up to date.
- Safety representatives (Sicherheitsbeauftragte): Since 29 May 2026, they are generally only mandatory from 50 regular employees; companies with more than 20 and fewer than 50 employees only have to appoint them if the risk assessment shows a particular hazard (Section 22(1) of Social Code Book VII, SGB VII).
Checklist: prepare now
- Check whether employees work on building components containing asbestos and clarify the permit or award to specialist contractors by 20 December 2026
- Schedule expertise courses for asbestos work before 5 December 2027
- Align current machinery orders and planned modifications with the Machinery Regulation from 20 January 2027
- Ask your accident insurance institution when the new DGUV Regulation 2 applies and review your service contract
- Record activities involving lead, diisocyanates, cobalt, PAHs and welding fumes and compare measured values with the future limit values
- Check incoming safety data sheets for new hazard classes and update the hazardous substances inventory and operating instructions
- Ensure working time recording with start, end and duration for all employees
- Keep documents up to date for an authority inspection and add the new dates to your legal register
Frequently asked questions
Which occupational safety changes apply in Germany in 2027?
The key dates are 20 January 2027, from which the EU Machinery Regulation (EU) 2023/1230 applies, and 5 December 2027, by which expertise for asbestos work must be proven. The BG BAU brings the new DGUV Regulation 2 into force on 1 January 2027. Shortly before that, from 20 December 2026, asbestos demolition work with low or medium risk requires a permit.
Do I have to retrofit my machines because of the Machinery Regulation?
No. Machines placed on the market under the Machinery Directive before 20 January 2027 may continue to be operated (Art. 52). The Regulation concerns new machinery and substantial modifications: anyone who substantially modifies a machine takes on the obligations of a manufacturer (Art. 18). Your operator obligations under the BetrSichV remain the same.
Do the new CLP labels already apply?
No. The format rules of the CLP revision (EU) 2024/2865, such as minimum font sizes, were postponed to 1 January 2028 by Regulation (EU) 2025/2439. The simplification agreed in June 2026 relaxes them further, for example with no fixed font sizes for supplies to businesses; it has been adopted but, as of November 2026, not yet published in the Official Journal. The obligations mainly fall on manufacturers and suppliers.
Will electronic working time recording become mandatory in 2027?
That is open. The federal government plans a reform of the Working Hours Act with electronic recording, but as of November 2026 there is no cabinet decision. Recording working time, on the other hand, is already mandatory – the Federal Labour Court derived the obligation from Section 3(2) No. 1 ArbSchG in 2022.
When do the new limit values for lead and diisocyanates apply?
Directive (EU) 2024/869 provides for transitional values until 31 December 2028. From 1 January 2029, lead has a biological limit value of 15 µg Pb/100 ml blood, and diisocyanates have an 8-hour value of 6 µg NCO/m³ and a short-term value of 12 µg NCO/m³. The occupational exposure limit for lead is 0.03 mg/m³; in Germany, TRGS 505 applies.
This guide gives a general overview of German occupational safety law and does not replace legal advice. The regulations in force and the rules of the statutory accident insurance institutions are authoritative.
Organise occupational safety digitally
With the occupational safety software AMS Go you handle risk assessments, safety instructions, inspections and more in one system – mobile and with AI support.
Newsletter
Occupational safety, straight to your inbox
New templates, guides and changes to regulations – free from AMS Go. The newsletter is in German. You can unsubscribe at any time via the link in every email.
More guides
- Basics
Machinery Regulation (EU) 2023/1230: what applies to operators and manufacturers from 20 January 2027
7 minRead - Hazardous substances
Asbestos in work on existing buildings in Germany: duties under the amended Hazardous Substances Ordinance
7 minRead - Organisation
DGUV Regulation 2 in Germany: support by company doctors and occupational safety specialists
7 minRead - Organisation
Legal register for occupational safety in Germany: structure, duties and updates
7 minRead




